HOW TO USE
There are 2 ways to operate the Booster:
There are 2 ways to activate a heat cycle:
Use the Booster as a regular extract
vape! Activate a heat cycle and inhale
through the mouthpiece.
MANUAL MODE:
Remove the bottom cap and insert your
Booster into any 14mm water pipe.
Activate a heat cycle and enjoy the dab
rig experience without a torch!
DAB RIG MODE:
The 3 voltage levels have a 15 second safe sesh and
will stop heating afterwards.
SAFE SESH DURATION
Press the button to heat the device
while you inhale, and release
when you exhale.
SAFE SESH MODE:
Click the button twice to activate
sesh mode. The device will heat & LED
will flash without you holding the
button, and shut off after 15 seconds.
SESH MODE:
To Next Page
Loading...
