POWER BUTTON
STORAGE
CHAMBER
HEATING
CHAMBER
MOUTH TIP
MICRO USB CHARGER PORT
ADJUSTABLE VOLTAGE 2.6V - 3.8V
HOW TO TURN ON/OFF
PREHEAT MODE
TURN ON: Press POWER BUTTON 3 mes quickly.
Voltage LED light will be on for 1.5 seconds indicang the device is ON.
TURN OFF: Press POWER BUTTON 3 mes quickly.
Voltage LED light will flash once indicang the device is OFF.
2.6 - 3.0V 3.0 - 3.4V 3.4V - 3.8V
Adjust voltage by rotang the dial on the boom of the
baery. Select voltage by posioning the line parallel to
the power buon. Voltage range is 2.6V - 3.8V.
VAULT includes 10 second Hold Time. During use
baery will flash 5 mes on auto shut off.
When the VAULT is in standby, the LED light will not turn on.
Click the power buon once to wake up the baery.
HOW TO ADJUST BATTERY VOLTAGE
Press POWER BUTTON 2 mes quickly to begin 15 Second Preheat mode.
LED Light will flash mulple colors during preheat mode. Press POWER
BUTTON 1 me to deacvate.
1. Unscrew the mouthpiece from the dual quartz wax tank heang chamber
2. Place extracts inside the heang chamber on the coil.
3. Screw the mouthpiece back onto the heang chamber.
4. Screw the wax tank onto the VAULT.
HOW TO LOAD EXTRACTS INTO THE WAX TANK
DUAL
QUARTZ
WAX TANK
+ STORAGE CHAMBER
HOW TO USE
INSTRUCTION GUIDE
• 450 MAH BATTERY •
ADJUSTABLE VOLTAGE 2.6V - 3.8V
15 SECOND PREHEAT MODE
• STORAGE CHAMBER •
• DUAL QUARTZ WAX TANK •
• MICRO USB CHARGER •
P R O D U C T F E A T URES