OOZE VAULT - User Manual

STORAGE
CHAMBER
Clean parts aer each use to keep your Vault in working condion.
Keep away from water and extremely hot or cold temperatures. Always
turn the baery off aer each session and before cleaning.
To clean the baery connecon, use a q-p slightly dipped in rubbing
alcohol. Avoid soaking with excess alcohol, and swab the area where the
atomizer connects to the baery. Allow to dry completely before use.
To clean the coils, unscrew the atomizer from the baery. Soak a q-p
with rubbing alcohol and scrub the inside of the coil to remove oil and
resin build-up. If stubborn residue remains, replace the coil with a fresh
one. Use an alcohol wipe to clean the baery and mouthpiece to sanize
between uses.
To ensure the best experience, please read and understand the
instrucons fully before your first use of the VAULT.
One Year Warranty is included with VAULT purchase. Warranty DOES
NOT apply to VAULT baery at fault from use of NON VAULT
CHARGER, or if there is any physical damage. If for any reason your
device stops working, please contact us to open a claim.
STORAGE CHAMBER
CHARGING INSTRUCTIONS
The VAULT includes a storage
chamber for 510 thread cartridge.
To access, unscrew boom cap,
screw cartridge on to the cap to
keep it secured and screw the cap
back onto the
Vault.
VAULT needs to be charged
when LED light flashes 10 mes.
Plug the
VAULT micro USB
charger into the charging port
located on the side of the unit.
LED light will flash while
charging, light will turn when
baery is 10% charged and
when the VAULT is fully charged.
IMPORTANT: Please use wall
outlet to charge device for best
charging experience.
CLEANING INSTRUCTIONS
WARRANTY
 
+ STORAGE CHAMBER
HOW TO USE
INSTRUCTION GUIDE

Summary

Cleaning and Maintenance

Cleaning Instructions

Instructions for cleaning the VAULT device after each use to maintain optimal working condition.

Storage Chamber

Information on the included storage chamber for 510 thread cartridges and how to use it.

Device Operation and Features

Product Features

Overview of key features including battery capacity, adjustable voltage, preheat mode, and storage.

Turning On;Off

Steps to turn the VAULT device on and off using the power button.

Adjusting Battery Voltage

Guide on how to adjust the voltage using the dial for optimal vaping experience.

Preheat Mode

Instructions for activating and deactivating the 15-second preheat mode.

Loading Extracts

Procedure for loading extracts into the wax tank heating chamber.

Warranty Information

Charging Instructions

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Ooze Vault is an extract battery and storage chamber designed for use with 510 thread cartridges and wax concentrates. It features a compact and portable design, with a focus on ease of use, adjustable settings, and convenient storage.

Function Description:

The Ooze Vault serves as a power source for vaporizing extracts and also includes an integrated storage chamber for a 510 thread cartridge. It is designed to provide a customizable vaping experience through adjustable voltage settings and a preheat mode. The device is activated and deactivated via a power button, and its status is indicated by an LED light.

Important Technical Specifications:

• Battery Capacity: 450 mAh
• Adjustable Voltage Range: 2.6V - 3.8V
  • 2.6V - 3.0V (indicated by a specific LED color, though not explicitly stated in the manual, it's implied by the color-coded sections)
  • 3.0V - 3.4V (indicated by a specific LED color)
  • 3.4V - 3.8V (indicated by a specific LED color)
• Preheat Mode Duration: 15 seconds
• Hold Time: 10 seconds (device will flash 5 times on auto shut off during use)
• Charging Port: Micro USB
• Cartridge Compatibility: 510 thread cartridges
• Wax Tank: Dual Quartz Wax Tank

Usage Features:

• Turning On/Off:
  • Turn On: Press the POWER BUTTON 3 times quickly. The Voltage LED light will illuminate for 1.5 seconds, signaling the device is ON.
  • Turn Off: Press the POWER BUTTON 3 times quickly. The Voltage LED light will flash once, indicating the device is OFF.
• Adjusting Battery Voltage:
  • Voltage is adjusted by rotating a dial located on the bottom of the battery.
  • To select a specific voltage, align the line on the dial parallel to the power button.
  • The voltage range is 2.6V to 3.8V, divided into three distinct ranges for precise control.
• Preheat Mode:
  • To activate, press the POWER BUTTON 2 times quickly. This initiates a 15-second preheat cycle.
  • During preheat mode, the LED light will flash multiple colors.
  • To deactivate preheat mode, press the POWER BUTTON 1 time.
• Loading Extracts into the Wax Tank:
  • Unscrew the mouthpiece from the dual quartz wax tank heating chamber.
  • Carefully place the desired extracts inside the heating chamber, directly onto the coil.
  • Screw the mouthpiece back onto the heating chamber securely.
  • Finally, screw the entire wax tank assembly onto the VAULT battery.
• Charging Instructions:
  • The VAULT requires charging when its LED light flashes 10 times.
  • Plug the micro USB charger (provided with the VAULT) into the charging port located on the side of the unit.
  • During charging, the LED light will flash.
  • The LED light will turn yellow when the battery reaches 10% charge.
  • The LED light will turn green when the VAULT is fully charged.
  • Important: For optimal charging performance, it is recommended to use a wall outlet.
• Storage Chamber:
  • The VAULT incorporates a storage chamber specifically designed for a 510 thread cartridge.
  • To access the chamber, unscrew the bottom cap of the device.
  • Screw your 510 thread cartridge onto this cap to secure it.
  • Then, screw the cap, with the attached cartridge, back onto the VAULT to store it safely and discreetly within the device.
• Standby Mode: When the VAULT is in standby, the LED light will not illuminate. Press the power button once to wake up the battery.

Maintenance Features:

• General Cleaning:
  • Clean all parts after each use to ensure the VAULT remains in optimal working condition.
  • Always turn the battery off after each session and before cleaning.
  • Keep the device away from water and extreme temperatures (hot or cold).
• Cleaning the Battery Connection:
  • Use a q-tip slightly dipped in rubbing alcohol.
  • Gently swab the area where the atomizer connects to the battery, avoiding excessive soaking with alcohol.
  • Allow the connection to dry completely before using the device again.
• Cleaning the Coils:
  • Unscrew the atomizer from the battery.
  • Soak a q-tip with rubbing alcohol and use it to scrub the inside of the coil to remove any oil and resin build-up.
  • If stubborn residue persists, it is recommended to replace the coil with a fresh one.
• Sanitizing:
  • Use an alcohol wipe to clean both the battery body and the mouthpiece to sanitize them between uses.
• Warranty:
  • A One Year Warranty is included with the purchase of the VAULT.
  • The warranty is void if the VAULT battery is damaged due to the use of a non-VAULT charger or if there is any physical damage to the device.
  • If the device stops working for any reason, customers are advised to contact Ooze Life to open a claim. It is crucial to read and understand the instructions fully before the first use to ensure the best experience and proper device handling.

OOZE VAULT Specifications

General

Brand	OOZE
Model	VAULT
Category	Camera Accessories
Language	English