6A- 10 1973 OPEL SERVICE MANUAL
Fig. 6A.12 Transmission Cross Member
Installation (Opel 1900 and Manta)
1. Lower engine and transmissior assembly into car.
2. Install components as
remov&d
in steps
.1
through
19 above.
Installation (GT)
1. Install bell housing, transmission and starter.
2.
Using suitable equipment raise assembly into vehi-
cle.
3. Install components as removed in steps 1 thru 21.
ENGINE OIL PAN REMOVAL AND INSTALLATION
Removal (Opel 1900 and Manta)
To remove the engine oil pan, a device similar to the
one illustrated in Figure 6A-14 can be made and used
to support the front of the engine. This particular
device was made up using hardwood, bolts, and
chain.
1. Assemble chains to engine.
Figure 6A-14 Engine Support Tool
-
Opel 1900 and Manta.
To Next Page
Loading...
