164 Vehicle care
Front turn signal lights
1. Undo screw and remove cover.
2. Undo screw and remove light
assembly from the bumper.
3. Disengage and remove the bulb
socket by turning anticlockwise.
4. Remove bulb by turning
anticlockwise slightly and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the
assembly and turn clockwise.
6. Attach light assembly into the
bumper and fix with the screw.
7. Insert cover into the bumper and
fix with the screw.
Adam Rocks
1. Disengage the small cap with a
screwdriver at the marked
position.
To Next Page
