Driving and Operating 151
.
no brake pedal operation
.
no active accelerator operation
or speeding-up
.
no active steering
If the driver is active, no warning will
be issued.
Activation
The lane departure warning system
is activated by pressing the
@. The
illuminated LED in the button
indicates that the system is
switched on. When the control
indicator
@ in the instrument cluster
illuminates green, the system is
ready to operate.
The system is only operable at
vehicle speeds above 56 km/h and
if lane markings are available.
When the system recognises an
unintended lane change, the control
indicator
@ changes to yellow and
flashes. Simultaneously a chime
sound is activated.
Deactivation
The system is deactivated by
pressing
@; the LED in the button
extinguishes.
At speeds below 56 km/h the
system is inoperable.
Fault
The lane departure warning system
may not operate properly when :
.
The windscreen is not clean.
.
There are adverse
environmental conditions, e.g.
heavy rain, snow, direct sunlight
or shadows.
The system cannot operate when no
lane marking is detected.
To Next Page
Loading...
