Vehicle care 203
Tail lights
1. Open and remove the cover on
the inside of the boot lid by loosen
the screw with a coin.
2. Brake lights, tail lights and fog
light are designed as Light
Emitting Diodes (LEDs) and
cannot be changed.
Remove bulb holder by turning
anticlockwise.
Turn signal lights (1)
Reversing lights (2)
3. Remove and replace bulb
4. Insert bulb holder into tail light
assembly and turn clockwise.
5. Close the cover by inserting the
fastener clips first. Lock the cover
by turning the screw clockwise
with a coin.
Additional lights in the boot lid
frame
1. Open the boot lid.
To Next Page
Loading...
Need help?
General
