Vehicle care 261
Tail lights
LED tail lights
Have lights repaired by a workshop in
case of failure.
Rear fog light
1. Turn the bulb holder anticlockwise
and remove it from the reflector
housing.
2. Slightly press down the bulb, turn
it anticlockwise and remove it
from the socket.
3. Replace and insert the new bulb
into socket by turning clockwise.
4. Insert the bulb socket into the
reflector and turn clockwise.
Centre high-mounted brake light
Have lights repaired by a workshop in
case of failure.
Bulb check
Switch on the ignition, operate and
check all lights.
Number plate light
Have lights repaired by a workshop in
case of failure.
Interior lights
Have the following bulbs replaced by
a workshop:
● courtesy light, reading lights
● load compartment light
● instrument panel illumination
To Next Page
