188 Vehicle care
5. Detach bulb from bulb holder and
renew the bulb.
6. Insert the bulb holder, engaging
the two lugs in the reflector
housing and rotate clockwise to
secure.
7. Attach wiring connector to bulb
holder.
8. Install protective cover.
Fog lights
Have the front fog light bulbs replaced
by a workshop.
Front turn signal lights
1. Remove protective cover.
2. Detach wiring connector from
bulb holder.
3. Rotate bulb holder anti-clockwise
to disengage.
4. Withdraw bulb holder from
reflector housing.
5. Detach bulb from bulb holder and
renew the bulb.
6. Insert the bulb holder, engaging
the two lugs in the reflector
housing and rotate clockwise to
secure.
7. Attach wiring connector to bulb
holder.
8. Install protective cover.
To Next Page
Loading...
