Need help?Do you have a question about the Opel Vauxhall VCI and is the answer not in the manual?
Explains warning notices structure and symbol designation for documentation.
Importance of observing warning signs on the product.
Specifies who can use the product and under what supervision.
Details FCC rules compliance for operation and potential interference.
Directs users to a location for open-source software licenses.
States compliance with EMC directive and potential interference.
Specifies that the device is intended for indoor use only.
Advises users on compliance with directives and restrictions for wireless links.
Emphasizes reading instructions for safe setup and use of the device.
Explains the purpose of the device and potential risks of misuse.
Lists the items included in the Opel-Vauxhall-VCI Base Kit.
Describes the keys and standardized ports for device operation and connection.
Details the fixed USB configuration and its importance for setup and firmware updates.
Explains WLAN setup requirements, including USB connection and pairing.
Explains Ethernet setup requirements, including USB connection and pairing.
Details various features like data transfer, power supply, and LED status.
Describes the VCI Manager software for configuration and updates.
Lists the system requirements for using the VCI Manager software.
Directs users to follow installation instructions for the user software.
Explains the need to install VCI Manager for configuration and updates.
Explains how to find the device's serial number for configuration.
Provides steps to update the device's firmware using VCI Manager.
Guides users on configuring the device for network communication via VCI Manager.
Explains how to check and match software versions for proper operation.
Covers configuring wireless network connections, including access and security.
Details the preparation and procedure for connecting via a wireless access point.
Provides steps to configure point-to-point wireless communication on the device.
Describes how to reset the device's point-to-point communication settings to factory defaults.
Guides on connecting the device to the vehicle's diagnostic port using the cable.
Details the procedure for resetting the device by disconnecting and reattaching power.
Explains how to perform a loopback self-test using the self-test adapter.
Provides recommendations for troubleshooting error LEDs after powering on the device.
Offers solutions for when the device does not power up correctly.
Addresses the issue of the vehicle LED flashing red, indicating a power detection problem.
Explains why the speaker might beep and how to resolve it.
Troubleshoots issues where the device turns off unexpectedly after disconnection.
Explains the flashing checkmark LED, related to internal temperature.
Guides on performing a cable test to check for defects in the diagnostic connection cable.
Provides recommendations for troubleshooting unsuccessful wireless network communication.
Addresses the yellow icon issue in VCI Manager, often related to wireless adapter recognition.
Offers solutions when the computer application cannot communicate with the device via USB.
Explains how to recover the device software after a power failure or update error.
Lists spare and wearing parts with their respective part numbers.
Provides instructions for temporary shutdown and storage.
Details instructions for handing over or transporting the device.
Guides on environmentally friendly disposal of the device and accessories.
General| Connection Type | USB |
|---|---|
| Compatibility | Opel, Vauxhall |
| Software | Opel/Vauxhall diagnostic software |
| Functions | programming |
| Protocols | CAN, J1850 |
To Next Page