Storage 83
Removing
Open the load compartment cover.
Pull the release lever up and hold. Lift
cover on right side and remove from
retainers.
Stowing in the load
compartment
If the load compartment cover is not
used, stow it in the storage in the
vehicle floor.
Open the cover of the storage in front
of the tailgate.
Insert the cover with the top side
downwards and with the release lever
to the left into the adapter on the right
side of the storage.
Fasten the load compartment cover in
the storage with the Velcro tape.
Installing
Insert the left side of the load
compartment cover in the recess, pull
the release lever up and hold, insert
the right side of the load compartment
cover and engage.
Rear floor storage cover
Floor cover
To Next Page
Loading...
Need help?
General
