opendesk Studio Desk User Manual

Mallet
A good joint will require
a gentle nudge. Using
a rubber mallet with a
white head will avoid any
marks or damage on the
furniture.
Chisel
Chiseling should not be
required on Opendesk
furniture. Should you
absolutely have to use
one, ensure you use a
sharp chisel and take
o small amounts of
material at a time.
Tools
PVA glue
We recommend using a
standard PVA based wood
adhesive. Use a good
quality paint brush or
roller to apply glue on the
product.
Oil
We recommend the use
of Osmo Raw Oil 3044.
Use a good quality paint
brush or roller to apply
oil on the product once
properly sanded.
Dowel
Dowels are used for the
glueing of two parts
together. Holes for the
dowels are part of the
cutting file. 6mmx25mm.
Clamp
Use clamps when glueing
two parts together. Be
sure to protect the parts
from the clamp heads
using ocuts or similar
methods.
Allen Key
Use a size 5 Allen key to
secure the bolts.
M6 Bolt
We use this fixing for the
assembly of the Studio
Desk. Use the M6 Bolt
(25mm) with the M6 Insert
(13mm).
M6 Insert
We use this fixing for the
assembly of the Studio
Desk. Use the M6 Insert
(13mm) with the M6 Bolt
(25mm).
Sanding Paper - P120 grit
P120 grit is usually
associated with a C type
of finish.
Further information on
finishing can be found in
our maker guide.
Sanding Paper - P240 grit
P240 grit is usually
associated with a B type
of finish.
Further information on
finishing can be found in
our maker guide.
Sanding Paper - P320 grit
P320 grit is usually
associated with an A type
of finish.
Further information on
finishing can be found in
our maker guide.
P120
P320
P240

opendesk Studio Desk Specifications

General

Brand	opendesk
Model	Studio Desk
Category	Indoor Furnishing
Language	English