OpenVox WGW1002 Quick Start Guide

www.openvox.cn 1 /6
VoxStack provides 2 working modes: Stand-alone and Cluster.
 Stand-alone: A single IP address manages one GSM modules (4 ports).
 Cluster: A single IP address manages up to 5 GSM modules (up to 20 ports).
Default IP: 172.16.99.1
User Name: admin
Password: admin
There are two RJ45 Network ports, ETH1 and ETH2. If you choose ETH1, you can access Board 1 only, and
access other boards with the same IP address, dierent port numbers. This will help to avoid IP conict. If
you choose ETH2, you can access dierent Boards with dierent IP addresses. But there is only one RJ45
Network port on WGW1002.
Stack Num IP Username Password
1
172.16.99.1 admin admin
2
172.16.99.2 admin admin
3
172.16.99.3 admin admin
4
172.16.99.4 admin admin
5 172.16.99.5 admin admin
This document applies to OpenVox GSM Gateway WGW1002,VS-GW1202-4/8G and VS-GW1600 series.

OpenVox WGW1002 Specifications

General

Network Interface	1 x 10/100Mbps Ethernet
Network Standard	IEEE 802.3, IEEE 802.3u
Fax	T.38
Power Supply	DC 12V/1A
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% Non-condensing
VoIP Protocols	SIP
Voice Codecs	G.711
Operating Temperature	0°C to 40°C
Ports	2 GSM Channels