Opera Classic - Page 36

35
| Opera Care Classic Installation Guide and Technical Specications Version 2
Item Instruction for testing Comment Yes No
1. Is the general condition OK?
2. Are the type plates for the bed and the
motors legible?
3. Is the Instruction Manual available to
staff?
4. Is the use one for which it was intended
and is it safe?
5. No surface damage or corrosion?
6. Mechanical components and welded
joints without faults?
7. Are all mechanical connecting elements
securely xed?
8. Mattress base underside undamaged?
9. Can all adjustment options for the bed be
operated without hindrance on site?
10. Is the mechanism for locking the thigh rest
in place in working order?
11. Are the side guard beams free of any
fractures, cracks or other damage?
12. Do the side guard beams sit securely in
their anchorage?
13. Has the load test been carried out
successfully according to the regulations?
14. Are the patient’s lifting pole and pole
sleeve undamaged without any signs of
wear?
15. Do the side rails lock safely into place?
16. Max. distance between the side rails
120mm?
17. Height of side rails above the mattress at
least 220mm?
7. Servicing
7.1 Technical Safety Checks accordng to EN 62353
Care bed:.......................................................................................................................................................
Serial No:.......................................................................................................................................................
Location........................................................................................................................................................
Person responsible:...................................................................................................................................
Inspected by:................................................................................................................................................