7
| Opera Care Classic Installation Guide and Technical Specications | Version 2
5
Detach the transport bracket
Release the two securing bolts (2) on the transport bracket by pulling out
the bolt (as per the photos below). The securing bolts are on the inside
frame of the head/footboards, with one at each side.
Position the head/footboards
Move the head/footboards over towards a wall. Position so that one
of the head/footboards is placed against the wall (this will become the
headboard).
Apply the brakes on the two castors of the headboard. Push down on the
brake pedal to brake/lock the castors.
4
2. Installation and Commissioning
Castor unlocked/unbraked Castor locked/braked
Securing bolt location
Securing bolt secured
Securing bolt released
22
To Next Page
