EasyManua.ls Logo

Optec 5000PG - Device Labels and Environmental Conditions

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Be sure to connect the power supply using a grounded outlet. Electrical shock or fire may result in event of malfunction
or electrical leakage.
CAUTION
The power supply plug must remain easily accessible in the case of an emergency.
In the case of an emergency the device can be de-energized by disconnecting the power from the AC outlet.
Labels and indications on the device
Warning labels and indications are affixed on the device. If the device’s labels are removed, contact STEREO OPTICAL
or your authorized distributor.
Attention, consult the accompanying Documents.
Any applied parts on this device are classified as Type B
Environmental Conditions
The environmental conditions (Humidity, Temperature and Pressure/Altitude are as follows:
- Operating Temperature: 10°C - 40°C
- Operating Humidity: 30% - 75%
- Operating Atmospheric Pressure: 700 106 kPa
- Handling Requirements:
Temp: 18°C to 49°C,
Humidity: 10% - 91%
Pressure: 93 106 kPa