Do you have a question about the Optek AS56 Series and is the answer not in the manual?
This instruction manual is valid for the following sensors: AS56-F, AS56-N.
Important information in this instruction manual is marked with the following pictograms.
For the safety of our employees and because of legal regulations we require a signed 'declaration of decontamination'.
Special legal regulations apply to the return and disposal of industrial waste equipment.
Diagrams and details of the AS56-F / AS56-N sensor dimensions and parts.
Details on the AS25 weld-in port accessories for AS56 sensor installation.
Information on Varivent adapter port AS25-G60 for AS56 sensor installation.
Details on Clamp adapter port AS25-G60 for AS56 sensor installation.
Specifications for T-pieces for pipelines according to DIN 11850.
Specifications for T-pieces for pipelines according to BS 4825 Part 1.
Details on the sealing flange AS25 for closing ports during maintenance.
Detailed exploded view of the AS56-F / AS56-N sensor with component list.
Guidelines for installing the sensor, including port preparation and orientation.
Step-by-step instructions for assembling and installing the sensor with O-rings.
Instructions for connecting and operating the airpurge feature to prevent condensation.
Recommendations for preventive maintenance, including wetted parts inspection and lamp module exchange.
Step-by-step guide for safely replacing the lamp module in the sensor.
Procedure for returning the measuring system to operation after lamp module replacement.
Lists of spare parts and accessories for the AS56 sensor.
Available cable sets with stainless steel connectors for the AS16/AS56 sensors.
List of various process adapters for AS56 sensor installation.
Specifications for T-pieces for DIN 11850 pipes compatible with AS56 sensors.
Specifications for T-pieces for OD pipes (BS 4825-1) compatible with AS56 sensors.
| Brand | Optek |
|---|---|
| Model | AS56 Series |
| Category | Accessories |
| Language | English |