Do you have a question about the Optex RX-40QZ and is the answer not in the manual?
Essential guidelines to follow before installing the detector, such as avoiding direct sunlight and humidity.
Coverage diagrams for the standard wide-angle detection pattern.
Instructions for using the optional FL-60N lens for long range area selection.
Step-by-step guide on how to remove and fit the detector lens.
Physical dimensions of the detector unit.
| Detection Range | 12m (40ft) |
|---|---|
| Coverage Angle | 90° |
| Detection Zones | 78 zones |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Alarm Output | N.C. 28V DC 0.2A max. |
| Tamper Switch | N.C. 28V DC 0.1A max. |
| Quad Zone Logic | Yes |
| Detection Method | Passive Infrared |
| Output | N.C. 28V DC 0.2A max. |
| Mounting Height | 1.5 - 2.4m (5 - 8ft) |
| Sensitivity Adjustment | Yes |
| Weight | 70g |
| Relay Output | N.C. 28V DC 0.2A max. |
| Type | Quad Zone Outdoor Passive Infrared Detector |
| Power Supply | 9.5 - 16 VDC |
Loading...