OPTi 750/8536 - User Manual

To Next Page

Assembly & User Instructions - Please keep for future reference

750/8536

OPTI 7FT X 5FT Metal Football Goal

Important – Please read these instructions fully before assembly or using

These instructions contain important information which will help you get the best from your

equipment and ensure safe and correct assembly, use and maintenance.

If you need help or have damaged or missing parts, call the Customer Helpline:0345 6402020

1 Top. & Bottom curve x 4

2. Middle Straight x 2

3. Top Post Upright x 2

4. Bottom Post Upright x 2

5. Bottom End L/H x 1

6 Bottom End R/H x 1.

7 Top Back Curve x 2.

8 Rear Connector x 2.

9 Bottom Back Curve x 2.

Components - Parts

Open all packaging and organise all straight and curved poles into numbered groups.

Each pole will have a number on it (1-9) matching the parts list above.

To connect the poles together, slide the

smaller connecting end inside the

corresponding pole end. Some poles will have

a connecting button to lock poles together.

Simply press this button down, while sliding it

inside a connecting pole, as shown.

Note: If this joint feels tight to assemble a little

washing up liquid on the small connecting end

will help slide together.

Follow the numbered diagram below and

assemble top curve (1) to middle straight (2)

to complete to top frame.

IMPORTANT: Attach the net at this

point. As you build each part of the

frame, you will need to thread the

loops at the edge of the net over

each part of the frame poles. The

end result should be the net (B)

hangs from the top bar and down to

the back oor frame.ﬂ

Assemble Instructions

Issue 1 9/26/16

Need help?

Do you have a question about the OPTi 750/8536 and is the answer not in the manual?

Summary

Product Components

Parts Identification

Lists and illustrates all components including frame parts, net, screws, and pegs.

Assembly Instructions

Important Safety and Usage Notes

Details critical warnings for assembly, usage, and safety precautions.

Initial Assembly Steps

Covers organizing parts, connecting poles, and assembling the initial top frame.

Frame Construction and Netting

Guides on building the frame, threading the net, and securing components.

Completing Frame Assembly

Instructions for building the main frame structure and attaching back curves.