EasyManua.ls Logo

Opticon Tego Pro - Battery Management; Changing Hearing Aid Batteries

Opticon Tego Pro
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
To remove the
battery – gently
push with a pen
Changing batteries
A worn-out battery should be removed immediately.
When battery power is low, you will hear a series of
short beeps. This indicates that it is time to change
the battery. It is not an indication of malfunction. To
replace the battery, follow these instructions:
• Open the battery drawer by pushing back the raised
edge and remove the old battery. To remove the old
battery, gently push with a pen.
• Remove the sticky label from the + side of the new
battery.
• Insert the new battery (size 13) so that its + sign
faces the + sign printed on the inside of the battery
drawer.
Any moisture on the battery surface should be wiped
off before use. When you change batteries, it may take
a couple of minutes before the new battery works with
full effect.

Related product manuals