8
Assembly
1. Insert the body of the shampooer into
the base and secure in place with the
screws provided.
2. Insert the handle into the body of the
shampooer ensuring that the handle
is pointing backwards. Secure in place
with the screw provided.
3. Insert the Clean Water Tank into the
body of the shampooer ensuring it
clicks into place. Your shampooer is
now fully assembled.
IMPORTANT! The appliance should be disconnected from the power
supply before you start to assemble.
42mm
Screws
Optim Shampooer comes with 3 screws.
42mm length, fit with PH2 screwdriver.
To Next Page
Loading...
