Mounting instructions
Make sure your Blade is mounted at least 180cm high from the oor and 3cm below the ceiling.
The unit requires 80cm clear space to the left and right.
Use the Sleeve Anchors (3 x J) to nail the Mount
Bracket (H) on the wall vertically.
Recommended height: 180 - 350cm
To mount your heater at that height from the oor,
height of the Mount Bracket (H)’s upper edge on the
wall should be approx. 204-374cm.
UP
H
J
Insert the provided Axle Screw & Nuts (I) to connect
the Heater (A) with the Mount Bracket (see picture).
I
A
Loosen the Axle Screw (see right picture)
to suit the Heater’s projection angle to the
required area, then fasten it.
Ensure the safe distances instructed in the
picture are adhered to.
3cm minimum
3cm minimum
180 cm minimum
Ground Level
Axle Screw
INTRODUCTION INSTALLATION
Features
WARNING
When you want to ll a larger area with warmth – the Blade is a great choice, oering
performance and features well suited to both commercial and home use.
With a 2800W infrared carbon bre heating element enabling coverage up to 22m
2
, the Blade
oers superb warming in both indoor and outdoor spaces, from large patios to workshops. The
heater is ultra low-maintenance and the carbon bre element has a lifetime of over 8000 hours.
The Blade comes with both wall-mount and ceiling-mount brackets for exible, quick and
simple installation wherever you need it. The high waterproof IP55 rating also means it’s built
to operate and withstand the British weather. The aluminium shell will not rust, and surface
temperature does not exceed 90-degrees, making it friendly for installation on all kinds of
construction materials.
Enhancing it’s money-saving capability, the eco-mode feature enables the heater to
automatically shut down its heating function when not in use. The integrated sensor constantly
monitors people’s movements up to a distance of 4-metres, and if it does not detect movement
in 4 minutes, it will switch the heater o.
• Innovative electric heating technology produces 2800W of infrared heat
• Ultra low glare carbon bre heating element – built to withstand over 8000 hours of use
• Heat distribution area up to 22m
2
• Waterproof rating of IP55 making it perfect for outdoor use, whatever the weather
• Comes complete with both wall and ceiling mount brackets for exible, easy installation
• Head can be tilted to the correct angle for optimal heat projection
• Control the device using the control panel or remote control
• Advanced control functions include eco-mode (detects movement and shuts down when no
one in vicinity) and o-timer (shuts down at specied time of 1, 2, 3 or 4 hours)
• Patented ‘snap-in’ heating tube structure makes replacing tubes easy
• Robust anodised extruded aluminium construction with brushed metal nish
4 5
This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
WARNING
This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
To Next Page
Loading...