INSTALLATION CONT.
Please follow the below instructions to operate your heater safely.
To avoid tampering - this heater can only be controlled via its Remote Control unit. Remote
Control will work up to 4m from the heater (line of sight).
Remote Control Operation
● Economy Button
Activates the PIR Sensor - heater will automatically shut o if it detects no movement in the
area for 4 minutes
●
Heat Button
Turns the heating elements On/O
●
Timer Button
Set the Timer function - 1/2/3/4hrs or None
HEAT
TIMER
H
E
AT
TIM
ER
ECONOMY
EC
O
N
O
M
Y
Replace CR2032
Battery Here
OPERATION
Hanging instructions
Nail the ceiling anchors (G) to your ceiling.
Ensure cover, screw ring and chains are in place
before hooking the chains to the hanging holes
of the heater.
180 cm minimum
5cm minimum
G
In addition to the above distance requirements,
please ensure the heater is also positioned a
minimum of 30cm from any wall.
30 cm minimum
6 7
To Next Page
Loading...