Why is the hub doesn't roll well on my Optima Exercise Bike?
If you have recently overhauled the hub you may have over tightened the bearing cups. If not then your hub has probably become contaminated with grit and grind and will need to be disassembled, cleaned and re-greased.
What to do if the pedals feel wobbly on my Optima Exercise Bike?
The pedals may need replacement bearings.
Why do I hear a metallic scraping sound when braking my Optima Exercise Bike?
This sound most likely indicates that your brake pads, rim, or disk are severely worn. Stop using the brake in question until you can replace the pad.
What to do if there is sideward play in the rear swingarm of my Optima Exercise Bike?
Check that all bolts on the swingarm are properly tightened. If this is not the source of the problem please contact your dealer or Optima for info on how to proceed.
What to do if the pedals squeak on my Optima Exercise Bike?
You will most likely need to disassemble the pedals and relubricate them.
What to do if the brakes are too tight on my Optima Exercise Bike?
If you have cable brakes, check to see whether the adjustment barrel is fully screwed into the brake lever.
What to do if the suspension is too soft on my Optima Exercise Bike?
Adjust the preload so that the bike sags only slightly when you sit on it. Now try riding again, adjusting the spring again as necessary.
Why is my Optima Exercise Bike not rolling properly?
Your brakes may be dragging and incorrectly set up. Please refer to your braking equipment manual.
What to do if the brake gets jerky on my Optima Exercise Bike?
Check the rim or disk for wear and trueness, or localized contamination.
What to do if the tire loses air slowly on my Optima Exercise Bike?
Check the tire for tiny holes or valve problems.
Explains the importance of reading the manual for optimal use, comfort, enjoyment, and safety.
General safety advice for cyclists, covering protective gear and legal requirements.
Importance and selection of protective helmets for cycling safety.
Essential safety guidelines and precautions for recumbent cycling.
Step-by-step instructions for assembling the recumbent bicycle after unpacking.
Procedures for correctly aligning and installing the front wheel on Rider models.
Instructions for connecting steering linkage components on multi-wheel models.
Detailed steps for measuring and aligning front wheels on 'Rider' models.
Guide to aligning steering components for optimal control and tracking.
Procedures for adjusting and bleeding various types of bicycle brakes.
Initial checks and considerations before riding the recumbent bicycle.
Essential checks for brakes, wheels, tires, and seat before each ride.
Guidance and encouragement for the initial riding experience on a recumbent.
Schedule for regular checks, including daily, weekly, and quarterly tasks.
Essential checks to perform before every ride for safety and function.
Troubleshooting common brake issues like dragging, poor performance, and jerky action.
Comprehensive explanation of warranty coverage, exclusions, and owner responsibilities.
General| Resistance | Magnetic |
|---|---|
| Display | LCD |
| Drive System | Belt |
| Transport Wheels | Yes |
| Programs | 12 |
| Heart Rate Monitoring | Yes |
| Adjustable Seat | Yes |
| Maximum User Weight | 120 kg |
To Next Page