Need help?Do you have a question about the OPTIMUM Maschinen OPTidrill DH 40CT and is the answer not in the manual?
Explains safety symbols, hazard classifications, and warning notes.
Defines proper usage, foreseeable misuse, and potential dangers of the machine.
Covers operational safety, operator positions, safety devices, and checks.
Guidelines for PPE, safety during maintenance, and incident reporting.
Details lubrication requirements and initial machine startup procedures.
Identifies control panel elements and basic machine settings.
Instructions for switching the machine on/off and safety protocols during operation.
General safety precautions and preparation for maintenance tasks.
Lists common malfunctions, their causes, and solutions.
General| Drilling capacity in steel (S235JR) | 40 mm |
|---|---|
| Continuous drilling capacity in steel (S235JR) | 32 mm |
| Drilling capacity in cast iron | 50 mm |
| Spindle mount | MT 4 |
| Spindle taper | MT 4 |
| Drill head rotatable | 360° |
| T-slots size | 14 mm |
| Distance spindle - table max. | 700 mm |
| Number of speed stages | 12 |
| Motor power | 1.5 kW |
To Next Page
