Assembly and maintenance instruction recirculating ball
OPTIMUM
MASCHINEN - GERMANY
5. Dezember 2007Page 34 Recirculating ball screw assembly and maintenance instruction ; Version 2.0
© 2007
GB
£ Disassembly of the support (part 2)
from the support (part 1) of the Z-
axis.
£ Slide the support (part 2) as
illustrated onto the spindle of the Z-
axis.
£ Before fastening the hexagon
socket screws apply a securing
mean.
£ Slide the expansion bellows on the
guideway of the Z-axis.
Fig.1-60: Assembly recirculating ball screw
Z-axis
Support (part 1)
Z-axis
Support (part 2)
Z-axis
Pillow block Z-axis
Recirculating ball
screw Z-axis
Support (part 2)
Z-axis
Securing mean
Recirculating ball
screw Z-axis
Hexagon socket
screw
Expansion bellows
To Next Page
Loading...