OPTIMUM
MASCHINEN - GERMANY
Assembly and maintenance instruction recirculating ball screw
5. Dezember 2007 Page 39Recirculating ball screw assembly and maintenance instruction ; Version 2.0
© 2007
GB
£ Align the drilling-milling head before
fixing it to the limit stop of the Z-axis.
£ Secure the drilling-milling head
using the lock screw.
£ Position and fix the drill chuck
protection above the support.
£ Now assemble the remaining parts
of the CNC add-on kit (
CNC conver-
sion instructions)
.
Fig.1-65: Assembly drilling-milling head
Limit stop Z-axis
Drilling-milling head
Lock screw
Drill chuck
protection
To Next Page
Loading...