Need help?Do you have a question about the Optimum OPTigrind GU 15B and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Grinding wheel dimensions | 150 x 20 x 12.7 mm |
| Bore diameter | 12.7 mm |
| Motor Power | 1500 W |
| Grinding wheel speed | 2850 RPM |
Details safety warnings and their classifications, including danger levels.
Classifies safety warnings into categories like DANGER, WARNING, CAUTION, INFORMATION.
Defines the specific and authorized uses of the grinding machine.
Describes uses that are considered misuse and are not permissible.
Provides guidance and measures to prevent improper use of the machine.
Lists potential hazards and risks associated with the operation of the grinding machine.
Outlines the necessary qualifications and training for personnel operating the machine.
Details essential safety precautions to be followed while the machine is in operation.
Describes the built-in safety features and their importance for safe operation.
Lists required personal protective equipment (PPE) for safe operation.
Provides critical safety advice for the user during machine operation.
Instructions on how to safely disconnect and secure the machine.
Details the initial steps and procedures for putting the machine into operation.
Further instructions for the initial commissioning process.
Guidance on connecting the electrical power supply to the machine.
Instructions and precautions for the normal operation of the grinding machine.
Safety precautions to be observed during maintenance activities.
Steps to take before starting any maintenance work on the machine.
Defines the correct and authorized uses for the extraction unit GU1.
Describes improper uses of the extraction unit that are not permitted.
Instructions for the initial setup and commissioning of the extraction unit.
Guidance on the proper operation of the extraction unit.
To Next Page
