25
If you need to erase an entire cassette, you might
prefer using a bulk tape eraser, available at your local
RadioShack store.
Preventing Accidental Erasure
Cassette tapes have two erase-protection tabs —
one for each side. When a tab is in place, you can
record on that side.
To protect a recording from being accidentally record-
ed over or erased, use a screwdriver to remove one
or both of the cassette tape’s erase-protection tabs.
This prevents
RECORD
from being pressed.
14-1112.fm Page 25 Thursday, July 1, 1999 1:05 PM
To Next Page
Loading...
