To Next PageTo Next Page
Need help?Do you have a question about the OPTOKON PM-212 and is the answer not in the manual?
General| Wavelength Range | 800 to 1700 nm |
|---|---|
| Resolution | 0.01 dB |
| Calibration Wavelengths | 850, 1300, 1310, 1490, 1550, 1625 nm |
| Battery Life | Up to 200 hours |
| Display | LCD |
| Power Supply | 2x AA batteries |
| Power Range | -70 dBm to +10 dBm |
| Optical Connector | FC/PC, SC/PC |
| Measurement Range | -70 dBm to +10 dBm |
| Spectral Range | 800 nm to 1700 nm |
Lists standard accessories included with the power meter.
Lists optional accessories available for purchase with the device.
Provides instructions for charging and maintaining the device's built-in battery.
Guidelines for cleaning and protecting the instrument's housing from damage.
Procedures for cleaning optical connectors to ensure optimal performance.
Details the absolute power measurement mode and its display interface.
Explains the relative power measurement mode and its display interface.
Describes how to save measurement results into the device's internal memory.
Explains how to view and retrieve previously saved measurement data.
Details the process of transferring saved measurement data to a computer.
Provides instructions for clearing all stored measurement data from memory.
Instructions on how to exit the memory management functions of the device.
Explains the fundamental principles behind measuring signal degradation in fiber optics.
Details the procedure for performing insertion loss measurements using Method 6.
Details the procedure for performing insertion loss measurements using Method 7.
