Do you have a question about the Optoma DX339 and is the answer not in the manual?
display technology | Single 0.55” DC3 DMD DLP |
---|---|
native resolution | SVGA (800 x 600) |
maximum resolution | UXGA (1600 x 1200) & 1080p (1920 x 1080) |
brightness | 2600 ANSI lumens |
contrast ratio | 5, 000:1 (full on/full off) |
displayable colors | 1.07 Billion |
lamp life (ECO+) | 6500 Hours |
---|---|
lamp life (ECO) | 5000 Hours |
lamp life (normal) | 4500 Hours |
lamp type | 190W Philips |
projection method | Front, rear, ceiling mount, table top |
---|---|
keystone correction | ±40° Vertical |
uniformity | > 85% |
aspect ratio | 4:3 Native, 16:9 & 16:10 compatible |
throw ratio | 1.95 to 2.15 (distance/width) |
projection distance | 3.3’ to 39.4’ (1 to 12 m) |
image size (diagonal) | 22.9” to 300” (0.58 to 7.62m) |
projection lens | F=2.41~2.55, f=21.8~23.98mm |
offset | 115% |
audio | 2-Watt speaker |
---|---|
noise level | 32dB/34dB |
remote control | IR remote with mouse control and laser |
operating temperature | 41 to 113° F (5 to 45° C) |
---|---|
power supply | AC Input 100-240V, 50-60 Hz, auto-switching |
power consumption (normal) | 263W |
power consumption (ECO+) | 200W |
power consumption (standby-ECO) | <0.5W |
weight | 5 lbs (2.27 kg) |
---|---|
dimensions (W x H x D) | 11.3” x 3.5” x 9.3” (287 x 88.9 x 236.2mm) |
display technology | Single 0.55” DC3 DMD DLP |
---|---|
native resolution | XGA (1024 x 768) |
maximum resolution | UXGA (1600 x 1200) & 1080p (1920 x 1080) |
brightness | 2600 ANSI lumens |
contrast ratio | 5, 000:1 (full on/full off) |
displayable colors | 1.07 Billion |
lamp life (ECO+) | 6500 Hours |
---|---|
lamp life (ECO) | 5000 Hours |
lamp life (normal) | 4500 Hours |
lamp type | 190W Philips |
projection method | Front, rear, ceiling mount, table top |
---|---|
keystone correction | ±40° Vertical |
uniformity | > 85% |
aspect ratio | 4:3 Native, 16:9 & 16:10 compatible |
throw ratio | 1.95 to 2.15 (distance/width) |
projection distance | 3.3’ to 39.4’ (1 to 12 m) |
image size (diagonal) | 22.9” to 300” (0.58 to 7.62m) |
projection lens | F=2.41~2.55, f=21.8~23.98mm |
offset | 115% |
audio | 2-Watt speaker |
---|---|
noise level | 32dB/34dB |
remote control | IR remote with mouse control and laser |
operating temperature | 41 to 113° F (5 to 45° C) |
---|---|
power supply | AC Input 100-240V, 50-60 Hz, auto-switching |
power consumption (normal) | 263W |
power consumption (ECO+) | 200W |
power consumption (standby-ECO) | <0.5W |
weight | 5 lbs (2.27 kg) |
---|---|
dimensions (W x H x D) | 11.3” x 3.5” x 9.3” (287 x 88.9 x 236.2mm) |
display technology | Single 0.65” DMD DLP |
---|---|
native resolution | WXGA (1280 x 800) |
maximum resolution | UXGA (1600 x 1200) & 1080p (1920 x 1080) |
brightness | 2600 ANSI lumens |
contrast ratio | 5, 000:1 (full on/full off) |
displayable colors | 1.07 Billion |
lamp life (ECO+) | 6500 Hours |
---|---|
lamp life (ECO) | 5000 Hours |
lamp life (normal) | 4500 Hours |
lamp type | 190W Philips |
projection method | Front, rear, ceiling mount, table top |
---|---|
keystone correction | ±40° Vertical |
uniformity | > 85% |
aspect ratio | 16:10 Native, 16:9 and 4:3 compatible |
throw ratio | 1.55 to 1.7 (distance/width) |
projection distance | 3.3’ to 39.4’ (1 to 12 m) |
image size (diagonal) | 27.2” to 301” (0.7 to 7.64 m) |
projection lens | F=2.5 ~ 2.67, f=21.8 ~ 23.98 mm |
offset | 112% |
audio | 2-Watt speaker |
---|---|
noise level | 32dB/34dB |
remote control | IR remote with mouse control and laser |
operating temperature | 41 to 113° F (5 to 45° C) |
---|---|
power supply | AC Input 100-240V, 50-60 Hz, auto-switching |
power consumption (normal) | 263W |
power consumption (ECO+) | 200W |
power consumption (standby-ECO) | <0.5W |
weight | 5 lbs (2.27 kg) |
---|---|
dimensions (W x H x D) | 11.3” x 3.5” x 9.3” (287 x 88.9 x 236.2mm) |
Details the specific DMD DLP chip and technology used for display.
Specifies the native resolution for each projector model (DS, DX, DW).
States the brightness level in ANSI lumens for the projectors.
Specifies the contrast ratio, indicating picture quality.
Details the expected lamp life in hours and type of lamp used.
Lists the computer systems and resolutions supported.
Specifies supported video standards and formats.
Lists all available input and output ports on the projector.
Details the duration of parts and labor warranty, and lamp warranty.
Provides part numbers for the lamp, UPC, and remote.