Need help?Do you have a question about the Optoma NuForce BE Free6 and is the answer not in the manual?
General| Type | In-ear |
|---|---|
| Driver | Dynamic |
| Driver Size | 6 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 16 Ohm |
| Bluetooth Version | 5.0 |
| Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
| Battery Life | Up to 6 hours |
| Charging Time | 1.5 hours |
| Water Resistance | IPX5 |
Procedure to fully charge the BE Free6 earbuds and charging case before first use.
Details on low battery voice prompts and how to check the battery status.
Steps to connect both BE Free6 earbuds for stereo audio playback.
Guide on connecting the BE Free6 earbuds to a smartphone via Bluetooth.
How to pair each earbud to separate devices for independent mono usage.
Instructions for pairing more than eight devices with the BE Free6.
Methods to switch between stereo and mono audio modes on the earbuds.
Procedure to restore the right/left earbud pairing for stereo sound.
Information on the IPX5 water resistance rating and usage limitations.
Factors affecting Bluetooth connection quality and troubleshooting.
Includes voice prompts list, general disclaimers, and FCC interference.
Covers FCC exposure, CE marking, EU conformity, and NCC regulations.
To Next Page
