Optoma TX665UST-3D User Manual

Step 3: USB display
When using USB display for the first time run the exe program on the virtual
cdrom drive (gets loaded once usb cable is connected between the computer
and projector).
Step 4a:
Step 4b:
Step 2:
Step 1:

Optoma TX665UST-3D Specifications

Display

native_resolution	1024x768
maximum_resolution	1600 x 1200
brightness	3000 ANSI Lumens
contrast_ratio	3000:1

Power

power_supply	AC Input 100-240V, 50-60Hz
power_consumption_bright	365 Watts
power_consumption_standard	325 Watts
power_consumption_active_standby	14 Watts
power_consumption_standby	<0.5 Watt

Operating Environment

operating_temperature	5 to 40°C
operating_humidity	85% Max Humidity

Audio

built-in_speaker_power	10-watt
number_of_speakers	Two 5-Watt
audio_pass_thru	HDMI Audio Pass-Thru

Weight and Dimensions

weight	7.6 kg
width	426.5 mm
height	210 mm
depth	407 mm

Summary

How to setup computer

Step 1: Connect projector and computer

Connect the projector and computer using VGA, HDMI, or USB cable.

Step 2: Power on projector and computer

Power on both the projector and the computer to begin the setup process.

Step 3: USB display setup

Instructions for USB display setup, including running an exe program on the virtual CD-ROM.

Step 4a: Laptop connection

Steps for laptop users to enable external monitor/projector via function keys.

Step 4b: Desktop computer connection

Instructions for desktop users to enable external monitor/projector via screen resolution settings.