Need help?Do you have a question about the Optoma W401 and is the answer not in the manual?
Display Specifications| display technology | Single 0.65ʺ DC3 DMD |
|---|---|
| native resolution | WXGA (1280 x 800) |
| maximum resolution | WUXGA (1920 x 1200) |
| brightness | 4500 lumens |
| contrast ratio | 15, 000:1 |
| displayable colors | 1.07 Billion |
| lamp life | 4500/4000/3000 hours (ECO+/ECO/normal) |
| lamp type | P-VIP 280W |
| projection method | Front, rear, ceiling mount, table top |
| aspect ratio | 16:10 Native, 16:9 and 4:3 compatible |
| keystone correction | ±40° Vertical |
| uniformity | >80% |
| offset | 112% |
Projection and Image| throw ratio | 1.28–1.536 (distance/width) |
|---|---|
| projection distance | 3.9'–32.8' (1.2–10 m) |
| image size | 36.3"–362" (0.79–9.43 m) |
| projection lens | F=2.4–2.66, f=18.2–21.8 mm |
| digital zoom | 1.0 ~ 2.0 |
Audio and Noise| audio output | Two 8-Watt speakers |
|---|---|
| noise level | 29dB |
| remote control | IR remote mouse control with laser |
Power and Consumption| operating temperature | 41–104°F (5–40°C), 85% max humidity |
|---|---|
| power supply | AC Input 100–240V, 50–60Hz, auto-switching |
| power consumption | Max 382W (Normal), Min 285W (Eco+), <0.5W (standby-ECO) |
Compatibility and Connectivity| computer compatibility | WUXGA, UXGA, SXGA+, WXGA+, WXGA, SXGA, XGA, SVGA, VGA resized, 3D VESA, PC and Macintosh compatible |
|---|---|
| video input compatibility | NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p) |
| 3D compatibility | Supports all HDMI 1.4a mandatory 3D format, side-by-side format and top and bottom format. 3D glasses are needed and sold separately. |
| vertical scan rate | 24–85Hz, 120Hz |
| horizontal scan rate | 15.375–91.4KHz |
| I/O connection ports | HDMI v1.4a, two VGA-in, VGA-out, composite video, three audio-in, audio-out, VESA, 12V trigger, RS-232C, RJ45 & USB-B |
Weight and Dimensions| weight | 6.4 lb (2.9 kg) |
|---|---|
| dimensions | 12.8" x 3.8" x 9.2" (325 x 97 x 234 mm) |
To Next Page
