EasyManuals Logo

Optoma X401 Specifications

Optoma X401
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.optoma.com
*Optoma guarantees that in normal use,Optoma DLP
®
color quality will be indistinguishable from when new. Please note that worn lamps will give slight variance. Exclusions: (1) Guarantee is voided if the projector is subject to damage
through mis-use. (2) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is particularly excessive (3) Guarantee will not apply if lamp brightness is below 50% due to wear or if the projector
is not working due to other fault. Typical lamp life achieved through testing. Will vary according to operational use and environment conditions. Optoma guarantees that in normal use, the DLP
®
imager guarantee will retain quality for
at least 5 years providing consistent pixel performance. Exclusions: (1) Guarantee is voided if the projector is subject to damage through mis-use. (2) Guarantee may be void in industrial or commercial entertainment environments where
dust or smoke is particularly excessive. Copyright © 2013, Optoma Corporation. All other product names and company names used herein are for identifications purposes only and may be trademarks or registered trademarks of their
respective owners. Errors and omissions excepted, all specifications are subject to change without notice. DLP
®
, BrilliantColor
and the DLP logo are registered trademarks of Texas Instruments.
www.optoma.com
DLP
®
X/W401
Projector
Optoma reserves the right to change this brochure without prior notice, please refer to www.optoma.com for any change
3D Technology
X/W401 supports HDMI 1.4a 3D playback, including 3D 1080P Blu-ray, 3D
gaming consoles like PS3, XBOX360 native 3D games, and 3D broadcasting
signal, just connect Full HD 3D player directly to X/W401 via HDMI, you can
instantly become part of a fantastically immersive experience . The 3D effect
isgenerated by splitting this signal into two standard video streams, one for
each eye. Using DLP
®
Link™ technology, the 3D glasses synchronise with
the image on screen to filter each stream to the correct eye. Your brain then
combines the two streams to make them jump into life.
Crestron RoomView
®
-NETWORK CONTROL
RoomView
®
software provides a custom configurable interface to monitor,
manage and control every device in every room remotely from any computer.
Manage up to 250 projectors at the same time (via master PC).
Control and alter the projector settings using a simple web browser page,
including OSD menu control.
Set up email alerts for warning messages.
Ideal for large installations in both in the educational and business environments.
DICOM Sim. display mode
X/W401 offers DICOM Sim. display mode*, for improving the medical training
program or discussion by enrich the gray-scale and details of the images.
DICOM (Digital Imaging and Communications in Medicine) is the international
standard for medical images and related information. From the emergency
department, to cardiac stress testing, to breast cancer detection, it is the
standard that makes medical imaging work for doctors and for patients.
* DICOM Sim. display mode is strongly recommanded for medical training or dicussion only
without
DICOM Sim. display mode
with
DICOM Sim. display mode
Specification
Display Technology
Native Resolution
Support Computer signal
Brightness / Contrast Ratio
Projection Lens
Display Colors
Image Size
Projection Distance
Throw Ratio
Digital Keystone Correction
Aspect Ratio
Scan Rate
Computer Compatibility
3D Compatibility
Input / Output Connections
Speaker
Uniformity
Noise
Lamp Type
Lamp Life
Power Supply
Dimensions(
WxDxH
) / Weight
X401
Texas Instruments DLP
®
technology / 0.55” XGA DMD Chip
1024 x 768 (
XGA
)
up to UXGA (
1600x1200
) 60Hz
4,000 ANSI Lumens / 15,000 :1
F# 2.4~2.66, f =18.2~21.8 mm; 1.2x manual zoom & focus
1073 million colors
30 to 307 inches
1.2m~10m
1.6~1.92:1 (Projection distance/width)
± 20° Vertical in System
4:3 Native, 16:9 Compatible
Horizontal:15,31~90 kHz / Vertical:50~85 Hz
UXGA, SXGA+, SXGA, XGA, SVGA, VGA Compression, VESA standards PC & Macintosh compatible
Video:480i & HDMI 1.4b Blu-ray 3D / Computer:1280x720/1024x768/800x600@120Hz
HDMI(support audio input) x1, VGA(YPbPr/ RGB) x2, Composite Video x1, Mini-jack Audio in x 3, VGA out x1, Audio output(Mini-jack) x1,
3D VESA Port x 1, RS232 Control Port x1, RJ45 (LAN for network control) x1, USB (Remote mouse/service) x1, +12V Relay output x1
8W speaker x 2
85%
29 dB (STD mode)
280 watt user-replaceable lamp
4000 hrs (STD mode)/ 3000 hrs(Bright mode)
Universal AC 100 ~ 240V, 50/60Hz @110VAC
329 x 239 x 119 mm / 3.5kg
W401
Texas Instruments DLP
®
technology / 0.65” WXGA DMD Chip
1280 x 800 (
WXGA
)
4,500 ANSI Lumens / 15,000 :1
36 to 360 inches
1.28~1.536:1 (Projection distance/width)
16:10 Native, 4:3/16:9 Compatible
X/W401
www.optoma.com
X/W401 creates stunning visual effects for marvelous presentations or tutorials; it equipped with the new
144Hz Blu-ray 3D system, full-color design, and network management functions. Additionally, it supports
DICOM SIM Display Mode for improving the gray-scale and details of the images for medical training
program or discussion.
X401: 4,000 ANSI lumens / W401: 4,500 ANSI lumens
15,000:1 High contrast ratio
Support HDMI 1.4a Blu-ray 3D format(144Hz*)
Support DICOM Sim. Display Mode
Crestron RoomView Network Control
Lan / wireless presentation Suport(optional)
8Wx2 Speaker for Large Environment
Standby mode <0.5w, saving the energy
Full 3D Stunning Peformance
*compatible with ZD301/ZD302 3D glasses

Other manuals for Optoma X401

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Optoma X401 and is the answer not in the manual?

Optoma X401 Specifications

Optical/Technical Specifications IconOptical/Technical Specifications
display technologySingle 0.55ʺ DC3 DMD
native resolutionXGA (1024 x 768)
maximum resolutionWUXGA (1920 x 1200)
brightness4000 lumens
contrast ratio15, 000:1
displayable colors1.07 Billion
lamp life4500/4000/3000 hours (ECO+/ECO/normal)
lamp typeP-VIP 280W lamp
keystone correction±40° Vertical
uniformity>80%
offset115%
aspect ratio4:3 Native, 16:9 compatible
throw ratio1.6–1.92 (distance/width)
projection distance3.9'–32.8' (1.2–10 m)
image size (diagonal)30"–307" (0.76–7.8 m)
projection lensF=2.4–2.66, f=18.2–21.8 mm
digital zoom1.0 ~ 2.0
audioTwo 8-Watt speakers
noise level29dB
operating temperature41–104°F (5–40°C)
power supplyAC Input 100–240V, 50–60Hz
power consumptionMax 382W (Normal), Min 285W (Eco+), <0.5W (standby-ECO)
Compatibility Specifications IconCompatibility Specifications
computer compatibilityWUXGA, UXGA, SXGA+, WXGA+, WXGA, SXGA, XGA, SVGA, VGA resized, 3D VESA, PC and Macintosh compatible
video input compatibilityNTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p)
3d compatibilitySupports all HDMI 1.4a mandatory 3D format, side-by-side format and top and bottom format
vertical scan rate24–85Hz, 120Hz
horizontal scan rate15.375–91.4KHz
i/o connection portsHDMI v1.4a, two VGA-in, VGA-out, composite video, three audio-in, audio-out, VESA, 12V trigger, RS-232C, RJ45 & USB-B
Physical Specifications IconPhysical Specifications
weight6.4 lb (2.9 kg)
dimensions12.8" x 3.8" x 9.2" (325 x 97 x 234 mm)

Related product manuals