Need help?Do you have a question about the Optoma ZH507 and is the answer not in the manual?
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 1 - 10 m |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 15.375 - 91.146 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 300000:1 |
| Screen size compatibility | 20.2 - 320.4 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | -30 - 30 ° |
| Light source type | Laser |
| Service life of light source | 30000 h |
| Focus | - |
| Offset | 100 % |
| Throw ratio | 1.4:1 - 2.24:1 |
| Zoom capability | Yes |
| Focal length range | 20.91 - 32.62 mm |
| HDMI version | 1.4/2.0 |
| Headphone outputs | 1 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Noise level | 30 dB |
| RMS rated power | 10 W |
| Product color | White |
| Market positioning | Portable |
| Cable lock slot type | Kensington |
| Supported video modes | 480i, 576i, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, PAL, PAL B, PAL D, PAL H, PAL I, PAL M, PAL N, SECAM, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 282 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | - W |
| Power consumption (economy mode) | 227 W |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 265 mm |
|---|---|
| Width | 337 mm |
| Height | 122.5 mm |
| Weight | 4500 g |
| Package weight | 6600 g |
Provides critical safety guidelines for operating the projector to prevent hazards.
Details safety precautions regarding laser radiation emission from the projector.
Details the various input and output ports on the projector.
Details the layout and functions of the first remote control.
Guides on how to position and install the projector.
Instructions for connecting external video and audio sources.
Explains how to adjust image height, zoom, lens shift, and focus.
Step-by-step guide to turning the projector on and off.
How to choose the active input signal for display.
Explains how to navigate the on-screen display (OSD) menus.
Details various display modes and image adjustments.
Configuration of power modes, auto-off, and sleep timers.
Configuration and management of network connectivity (LAN).
Instructions for installing and cleaning the projector's dust filter.
Table showing image sizes for various projection distances.
Common problems and their solutions for projector issues.
Explains LED indicators and error messages.
To Next Page
