Need help?Do you have a question about the optonica SM-1515H and is the answer not in the manual?
Covers power source, consumption, semiconductors, dimensions, and weight.
Details continuous power output, intermodulation distortion, damping factor, and power bandwidth.
Lists preamp circuit, input/output specs, RIAA deviation, tone control, and low cut filter.
Specifies frequency response for main and preamp sections.
Lists and describes front panel controls like Bass Control, Volume, Power Switch, and selectors.
Details rear panel connections including speaker terminals, input/output jacks, and fuse holder.
Instructions for removing the cabinet, front panel, and bottom plate.
Guidance on checking and setting the mains voltage selector before connecting the unit.
A visual representation of the amplifier's internal circuits and signal flow.
Details the differential 1-stage pure complementary circuit with Darlington power packs.
Explains how output signals are converted to DC for logarithmic amplification to drive output meters.
Describes the muting circuit for preventing noises during power on/off and thermal issues.
Details the two-power-supply FET and transistor-based equalizer circuit.
Notes on replacing ICs, recommending silicone grease for heat sink contact.
Illustrates the wiring connections for various components on the printed wiring board.
Presents the full schematic diagram of the amplifier, including component references.
Lists common phenomena, their causes, and countermeasures for troubleshooting.
Lists replacement part numbers and descriptions for ICs and transistors.
Details replacement part numbers and descriptions for resistors and capacitors.
Lists replacement parts for capacitors, switches, sockets, and other miscellaneous items.
To Next Page
General