Need help?Do you have a question about the OPTREX CORPORATION DMF 5000 series and is the answer not in the manual?
Lists key characteristics like readability, interface, controller, display size, and operating range.
Defines the absolute maximum electrical and environmental limits for safe operation.
Lists typical and min/max electrical parameters like voltage, current, and input levels.
Details recommended supply voltages (Vcc-Vee/Vadj) for different models and temperatures.
Details the pinout and function for DMF 5001N, 5002N, 5003N Series.
Illustrates the internal architecture and signal flow of the LCD module controller.
Defines critical timing parameters for bus signals like C/D, CE, WR, RD, and data transfer.
Explains the relationship between display memory addresses and physical screen positions.
Provides default settings for font and column configurations in a table.
Details the function of specific jumpers (J6, J7, J2, J3, J8, J9, F4, FS) for configuration.
Explains procedures for data transfer, including status checks and command/data writing.
Lists all available commands with their codes, parameters, and execution times.
Details the sequence of commands required for initial setup after power-on.
Describes the built-in character ROM and user-definable character RAM.
Circuit diagram for connecting the module to the CPU's memory address space.
Circuit diagram for controlling the module as an I/O device.
Shows how to interface the module using a Programmable Peripheral Interface (PPI) LSI.
Instructions for safe physical interaction, cleaning, and protection against static discharge.
Guidelines for optimal storage conditions to prevent damage from temperature and humidity.
Rules for connecting and powering the module safely with the main system.
Warnings regarding water condensation, UV exposure, and respecting maximum ratings.
General| Brand | OPTREX CORPORATION |
|---|---|
| Model | DMF 5000 series |
| Category | Control Unit |
| Language | English |
To Next Page