optris PIX Connect - Temperature Unit Configuration; Reference Bar Scaling

optris PIX Connect – E2021-05-A
19
2.1.2. Temperature unit
The temperature unit can be changed in the menu Tools, Extended
and Options. When setting the Temperature unit you can choose
between Celsius (°C) and Fahrenheit (°F).
Alternatively, the temperature unit can also be
changed by pressing the right mouse button in the
live IR image.
2.1.3. Temperature range scaling of reference bar
Via the Temperature range scaling settings you can allocate colors to
temperature values within the reference bar.
These are the following options:
Manual
The lower and the upper border (Min/Max) can be determined individually.
</>
The software continuously defines the upper and the lower border based on the hottest and
coldest pixel in the image.