optris PIX Connect - Page 20

optris PIX Connect – E2021-05-A
20
1 σ
The mean value of all pixels in the image will be continuously calculated. Based on the mean
value one standard deviation (1 sigma) sets the limits of reference bar.
3 σ
The mean value of all pixels in the image will be continuously calculated. Based on the mean
value three standard deviations (3 sigma) set the limits of reference bar.
OPT
With OPT a contrast optimization is achieved. This function allows an optimum contrast
between very low and very high temperatures.
Note
Palette optimization (OPT) is not available for PI 1M/ 08M/ 05M.