Need help?Do you have a question about the Opus Technologies Octopus and is the answer not in the manual?
General| Brand | Opus Technologies |
|---|---|
| Model | Octopus |
| Category | Home Theater System |
| Language | English |
Keypad used to select and control sources connected to the MCU.
Central control unit connecting audio/visual sources and distributing them to the desired zone.
Distributes visual sources to zone screens (optional).
System remote control for everyday use in conjunction with the keypad.
Learning remote for controlling source equipment and teaching IR commands.
Active and passive A-BUS compatible ceiling mounted speaker pair.
Control Sound Adjustment functions, defaulting to Volume.
Changes audio source or accesses sound adjustment functions.
Turns the system on/off or switches to standby mode.
Indicates system status or action on source change.
Adjusts bass level using Up/Down buttons after holding Select.
Adjusts treble level using Up/Down buttons after holding Select.
Adjusts audio balance between speakers using Up/Down buttons.
Adjusts audio levels between main speakers and external equipment.
Adjusts bass level for active speakers using volume buttons.
Adjusts treble level for active speakers using volume buttons.
Adjusts audio balance for active speakers using volume buttons.
Adjusts audio levels between speakers and equipment via AMR650.
Selects the audio source to be listened to.
Turns the keypad and its corresponding zone on and off.
Selects additional sources like EXT/CCTV if fitted.
Selects local input where fitted.
Switches the entire system to standby.
Mutes the audio output of the system.
Connects up to six audio source equipments to MCU via RCA.
Uses IR outputs and emitters for remote control of source equipment.
System is compatible with almost any hi-fi or video separate.
Difference in functionality and controls between main and sub-zones.
Details system capacity and expandability with multiple MCUs.
Confirms any type of Cat5e cable can be used for system connections.
Recommends Octopus speakers for optimization but not mandatory.
States there is no limit to the number of remotes that can be used.
Advises avoiding direct sunlight, plasma screens, and noise sources.
Specifies the maximum cable run between MCU and WCU is 30 meters/100 feet.
Section to list and specify zone/room configurations and sub-zones.
Fields for installer's name, address, contact, and email.
Field to record the serial number(s) of the MCU units.
Section to list names of connected audio/video source equipment.
To Next Page