opuscamper.com.au
25
INSTALLING YOUR
Air OPUS® ANNEXE
STEP 3
STEP 4
Spread annexe canvas out from the camper as shown
Make sure the 5 valves on the Opus camper tent are closed a
te the main tent
whilst the annexe attached.
STEP 5
Before
g the annexe make sure all 7 outer valves on the annexe are closed.
STEP 6
With the CROSS FILLING TUBE (CFT) attached, you can open both valves, one from tent
and the other on annexe. This will then start to
ll the annexe turn air pump on and it
will automatically turn off.
STEP 7
Turn inbuilt pump on to start annexe ation. Keep an eye out for obstructions and
when the annexe starting to form, feel free to help guide the air beams to assist in easy
ow of the air through them and for al annexe structure.
OP 4 USER MANUAL | version 2.0
To Next Page
Loading...
