Need help?Do you have a question about the OPW Petro Vend FSC3000 and is the answer not in the manual?
Explains safety alert types and information panel symbols used in the manual.
Guidelines for safe installation, referencing codes and local regulations.
Procedures to prevent damage from Electrostatic Discharge (ESD) to components.
Details compliance with Federal Communications Commission (FCC) rules.
Critical safety instructions for handling internal coin cell batteries.
Lists physical dimensions, power requirements, and operating temperature.
Overview of main board components, parts list, and exploded views.
Explanation of USB, Ethernet, RS-485, RS-232, and phone line port functions.
Covers integrated/remote installation, SIMM activation, and wireless modem setup.
Details access connections, baud rates, and PC connectivity options.
Guide to cold-start, ARTWare, and Ethernet port configuration steps.
How DPC controls Wayne, Gilbarco, and Gasboy dispensers; includes specifications.
DTC usage with dispenser card terminals, covering Wayne CAT and Gilbarco CRIND.
Basic maintenance for remote FSC3000, checking cables and ventilation.
Procedures for cleaning cabinets, displays, keypads, locks, and card readers.
Instructions for cleaning remote unit cabinets and lubricating door locks.
Steps for cleaning and maintaining the dot-matrix journal printer.
Checklist for validating pump operation, restrictions, and card authorization.
General| Model | FSC3000 |
|---|---|
| Category | Controller |
| Communication Protocols | RS-485, Ethernet |
| Number of Dispensers Supported | Up to 32 |
| User Interface | LCD Display with Keypad |
| Enclosure Rating | NEMA 4X |
| Communication Ports | RS-485, Ethernet |
| Humidity | 5% to 95% non-condensing |
| Operating Temperature | -4° to +158°F (-20° to +70°C) |
To Next Page
