Reverb
Adjusts the reverb level for both channels. Higher settings add longer trails for a spatial effect.
Tuner
Depress the ON/OFF button to engage the integrated chromatic Tuner.
Set the Volume to zero for silent tuning if required.
The appropriate red LED will illuminate on the display to indicate the note being played. If the green # LED also illuminates, this indicates a chromatic note, e.g. F Sharp
(F#).
The > arrow LED indicates the note is tuned too low in pitch.
The < arrow LED indicates the note is tuned too high in pitch.
Adjust the string’s pitch in the direction shown by the arrows until the green OK LED lit.
To Next Page
Loading...
