OrangeRx FRSKY User Manual

O RANGE F R S KY USB D ONGLE
U SER M ANUAL
F EATURES :
• Compatible with FrSky aircraft radio and module systems
• 6 channel output to standard USB HID device
• Compatible with all open source simulators (Freerider, HotProps, Liftoff, DRL etc) and many others.
• Size: 10.5x23.5x52.5mm
Current consumption: 40mA
USB DONGLE I NSTALLATION AND BINDING
Before you can use the dongle you need to bind it to your transmitter as a regular receiver.
Insert the dongle in any available USB port of your PC with the button pressed and hold. Release the button. The dongle LED will blink rapidly.
Initiate binding process on your transmitter. The dongle LED will become solid. Unplug dongle. The dongle is bound.
Please keep distance 1..2m from transmitter to dongle for proper binding.
Plug the dongle in. The dongle will be identified by Windows as a standard HID device and the driver will be installed automatically.
Note: For MAC please use relevant drivers for HID devices
In Devices and Printers section of you will see this pictogram:
That means that your dongle was installed properly. Right click on this pictogram and chose Game Controller Settings

OrangeRx FRSKY Specifications

General

Brand	OrangeRx
Model	FRSKY
Category	Computer Hardware
Language	English

Summary

USB Dongle Installation and Binding

Binding the Dongle

Process to bind the USB dongle to your transmitter using the button and LED indicators for successful pairing.

Verifying Dongle Installation

Confirms proper installation by checking for the 'FrSky USB HID' pictogram in Windows 'Devices and Printers'.

Configuring Game Controllers

Checking and Calibrating Channels

Accesses dongle properties to check and calibrate input channels for optimal game controller performance.