7
Replacing temperature regulator(see diagrams 2 & 6)
– switch off water supply to faucet
– pull out temperature regulating handle (1)
– release regulating socket (5)
– release temperature regulator (15) using 19 mm socket wrench and pull out of faucet frame
– push new regulator into place and screw to bottom
– replace regulating socket
– switch on water supply to faucet and set temperature in accordance with instructions given
above
Risk of freezing
If the faucet is fitted in places where water left inside it may freeze (e.g., during the winter in unheated
holiday accommodation) the faucet must be emptied:
– close main valve
– open regulating valve
– unscrew both water sifters from faucet frame
The faucets and jet devices are not suitable for use in hot saunas (max. + 65°C)
To Next Page
Loading...
