What to do if my Oras Safira does not supply hot water?
If your Oras Water Heater isn't providing hot water, first, make sure the temperature selector isn't set to "°C". If it is, switch the appliance ON by adjusting the temperature selector. If that's not the issue, check the plug and the fuses/MCBs in the fuse box/distribution panel to ensure the appliance is receiving power.
Why is my Oras Safira Water Heater making loud boiling noises?
Loud boiling noises inside your Oras Water Heater usually indicate that the appliance is scaled up. To resolve this, have the appliance descaled by a qualified contractor.
How to fix reduced water flow from my Oras Safira?
If water is only coming out of your Oras Water Heater at a reduced rate, the litter filter and/or flow limiter might be dirty. Clean the litter filter and the flow limiter to restore the water flow.
General| Brand | Oras |
|---|---|
| Model | Safira |
| Category | Water Heater |
| Language | English |
Provides foundational knowledge about the appliance and its documentation.
Details essential safety rules, intended use, and warnings for safe operation.
Explains how the appliance functions and its operational controls.
Provides guidance on maintaining the appliance's condition and longevity.
Lists common problems, their causes, and recommended solutions for fault resolution.
Emphasizes safety precautions and requirements for qualified personnel during installation.
Details the components included with the appliance upon delivery.
Outlines requirements for selecting a suitable and safe location for appliance installation.
Guides the physical mounting and securing of the appliance and its water connections.
Details the step-by-step process for initial start-up and appliance handover.
Provides instructions on how to safely disconnect and turn off the appliance.
Offers solutions for common installation and operational issues encountered.
Explains the procedure for safely draining water from the appliance.
Provides detailed physical measurements and connection specifications of the appliance.
Illustrates the electrical circuit layout for the appliance.
Shows the relationship between temperature settings and heating duration.
Mentions where to find country-specific approval symbols on the type plate.
Describes potential peak temperatures that may occur under fault conditions.
Presents data on the appliance's energy efficiency and consumption according to EU regulations.
Summarizes key technical specifications including hydraulic, electrical, and application data.
To Next Page
