16
EN
Problem solving
Common problems
In the vicinity of the appliance, the steam and the warm air are
precipitated from it.
When cooked, humidity may evaporate from the vessel. Most steam is
released after the cover is opened and can therefore precipitate around
the device.
This is not a malfunction.
You accidentally switched on the appliance without the food.
In the case of short-term operation of the appliance without an
intermediate food, without the water in the bowl, there is no risk of
damage.
Never, however, do this intentionally.
Problém
The device did
not switch on.
The device is
not heating
If the device does not work:
a. Ensure that the device is properly plugged into the power supply. If it
is not, disconnect it from the mains, wait about 10 seconds, and then
reconnect it.
b. Check the switchgear with the circuit breakers (fuses).
If everything is ok, test the outlet with some other device.
Cause
The power cord is not
properly connected.
The circuit
breaker is off
Problem with electrical
socket.
The power cord is not
properly connected.
Solution
Disconnect and after approx
Reconnect the power cord
for 10 seconds.
Turn on the circuit breaker
Try plugging in another
device.
Disconnect and reconnect
the power cord.
To Next Page
Loading...
