Need help?Do you have a question about the Orbea OIZ OMR CARBON 2019 and is the answer not in the manual?
General| Frame Material | Carbon |
|---|---|
| Wheel Size | 29" |
| Fork Version | Performance |
| Fork Travel | 100mm |
| Rear Shock | Fox Float DPS |
| Rear Shock Travel | 100 mm |
| Drivetrain | Shimano XT |
| Gears | 12 |
| Brakes | Shimano XT |
| Fork | Fox 32 Float SC |
| Tires | Maxxis |
| Handlebar | OC Mountain Performance |
| Stem | OC Mountain Performance |
| Saddle | Orbea |
Explains safety symbols, tools, and assembly compounds used throughout the manual.
Details the legal warranty provided by Orbea for its bicycles and components.
Outlines the lifetime commercial warranty for frames and rigid forks for registered products.
Instructions and website link for registering a bicycle to benefit from the lifetime warranty.
Explains the procedure for processing warranty claims through an authorized Orbea dealer.
Guidance on cleaning the bicycle with mild soap and water, avoiding pressure washers.
Instructions for lubricating the drivetrain, emphasizing minimal amounts and avoiding aerosols.
Pre-ride checks for frame, chain, brakes, tires, wheels, headset, and pivot points for safety.
Guidelines for component inspection and maintenance schedules, noting dependency on usage conditions.
Guidelines on maximum tyre width to ensure clearance and prevent frame damage.
Importance of adhering to minimum seatpost insertion depth to avoid frame stress and accidents.
Adhering to the maximum fork length to prevent frame stress and potential accidents.
Defines the intended use of the bicycle according to ASTM Condition 3 standards.
Details headset specifications and dimensions for use with standard stems.
Illustrates the standard stem option with round headset spacers and component breakdown.
Explains the OC3 stem option with profiled headset spacers and component breakdown.
Assembly and hardware details for the rear axle and derailleur hanger on OIZ OMX 2021.
Assembly and hardware details for the rear axle and derailleur hanger on OIZ OMR 2019.
Details assembly and hardware for carbon linkage models (OIZ OMR 2019/2020, OIZ OMX).
Details assembly and hardware for aluminum linkage models (OIZ OMR 2020 M20-M30, OIZ OMR 2021).
Instructions for assembling and hardware for the shock on carbon linkage models.
Instructions for assembling and hardware for the shock on alloy linkage models.
Details assembly and hardware for the main pivot on Orbea bikes.
Details the swingarm cable guide wedge kit for carbon linkages.
Details the downtube BB cableguide kit for carbon frames.
Details the frame cableguide kit for carbon frames.
Illustrates the cable routing for rear brake and derailleur systems.
Recommended shock pressures for the Fox DPS I-Line shock.
Recommended air pressure and rebound settings for the Fox 34 fork.
Lists materials, compatible components, and specifications for the OC Squidlock system.
Shows different assembly configurations for the OC Squidlock lever system.
Step-by-step guide for assembling and adjusting the suspension remote cables.
Guidance on adjusting the cable tension for the dropper seatpost remote.
Provides technical specifications for the OC3 MTB stem, including material, dimensions, and compatibility.
Details the kit for the OC3 MTB stem topcap, including components and quantities.
Details the kit for OC3 MTB headset spacers, including sizes and quantities.
Details the headset cover for the OC3 MTB, specifying diameter and part number.
Details the kit for a computer mount on the OC3 topcap, including adapters.
Lists the technical specifications of the OC3 MTB carbon handlebar.
Explains the multitool storage feature inside the OC3 MTB carbon handlebar.
Link to view and download Orbea photos, videos, and documents.
Information on how dealers can assist with setup and maintenance.
To Next Page
