Need help?Do you have a question about the Orbea BLUE PAPER OIZ CARBON OMX and is the answer not in the manual?
General| Frame Material | Carbon |
|---|---|
| Suspension Type | Full Suspension |
| Wheel Size | 29" |
| Shifters | Shimano XTR M9100 |
| Headset | Acros Alloy |
| Handlebar | OC Mountain Performance |
| Stem | OC Mountain Performance |
| Rear Derailleur | Shimano XTR M9100 |
| Chain | Shimano XTR M9100 |
| Wheelset | Oquo Mountain Performance |
| Tires | Maxxis Rekon Race |
| Seatpost | OC Mountain Performance |
Explains danger, warning, and caution symbols for user safety.
Lists necessary tools and required torque values for bike assembly.
Describes various assembly compounds like grease and carbon paste.
Details Orbea's 3-year legal guarantee for manufacturing defects.
Explains the lifetime guarantee for frames and rigid forks.
Instructions to register the bike for the extended warranty.
Steps for processing guarantee claims via authorized dealers.
Guidance on cleaning the bike to maintain condition and prevent wear.
Proper lubrication of the drivetrain for optimal performance.
Essential checks before each ride for safety and functionality.
Recommended maintenance intervals for bike components.
Emphasizes using original Orbea spare parts for safety and performance.
Procedures for inspecting the bike after an accident.
Specifies maximum tyre width and clearance requirements.
Importance of correct seatpost insertion depth for safety.
Warning against exceeding specified headset spacer limits.
Defines the maximum allowable fork length (axle-to-crown).
Defines the bike's intended use and terrain compatibility.
Provides measurements for frame geometry across sizes.
Guidance for choosing the correct frame size based on rider height.
Max/min seat heights for frame sizes and dropper seatposts.
Frame material, linkage, suspension design, fork/shock specs.
Brake types, chainring sizes, chainline, rear axle standards.
Details on headset type, seatpost diameter, and clamp.
Max disc size, cabling types, and compatibility info.
Max weight, power meter, trailer compatibility.
Specific technical details for the HS02 headset.
Dimensions related to the headset and head tube.
Technical specs and bearing details for the HS02 headset.
Explains 'Regular Stack' and 'Low Stack' headset options.
How the Spinblock function limits headset rotation.
Guidance on compatibility with non-Spinblock stems.
Lists various components for headset assembly and maintenance.
Details rear axle standards and measurements.
Information regarding derailleur hangers.
Instructions for main swingarm pivot point hardware and bearings.
Use of compensation washers for linkage adjustment.
Details shock mounting bolts and torque specifications.
Explains compatibility and features of the I-Line shock.
How to install and adjust the chainguid.
Instructions for replacing BB spacer for Shimano cranks.
Details different frame protector kits and their application.
Instructions for installing the seatpost clamp with torque specs.
Routing shock remote and dropper seatpost cables.
Routing rear derailleur and rear brake cables.
Procedure for fitting ICR tubes into the swingarm.
How to route cables through the SIC HS02 headset.
Exploded view and assembly of OC stems.
Describes SIC rubber grommets for headset collectors.
Details the specifications of the OC ST-MP10 stem.
Instructions for mounting handlebars on the OC ST-MP10 stem.
Details the specifications of the OC ST-MP21 stem.
Details the specifications of the OC ST-MC10 stem.
Procedure for fixing the stem faceplate on 'No Gap' MTB stems.
Explains the use of the torque stop on stems for the fork tube.
Details compatibility of OC CM-04/CM-05 mounts and adapters.
Lists technical specifications for the Squidlock remote.
Shows different mounting configurations for the remote.
Describes the operation of the Squidlock remote.
Instructions for mounting and adjusting cable tension for the remote.
Lists specifications for Fox DPS I-Line shocks.
Provides recommended air pressures for the shock.
Configuration for air volume reducers on DPS I-Line shocks.
Guidance on rebound adjustment for Fox 34 SC forks.
Recommended air pressure for Fox 34 SC forks.
Configuration for air volume reducers on Fox 34 SC forks.
Official statement of product compliance with EU directives.
Links to Orbea's social media and contact channels.
To Next Page
